Yuasa UXF Range
*Final Voltage: 1.75V/cell @ 25o
The Yuasa UXF Overview document can be found here (UXF Overview doc).
Yuasa VRLA battery’s unique construction and sealing technique ensure no electrolyte leakage from the case or battery terminals.
Yuasa UXF battery containers and lids are made from a flame retardant plastic material (Oxygen Index 30).
Yuasa UXF batteries have been specifically designed to allow for parallel connections. This provides the ability to configure and expand back-up power requirements to better suit the specifications of the application.
Electrolyte Suspension System
All UXF batteries utilise Yuasa’s unique electrolyte suspension system incorporating a micro fibre glass mat to retain the maximum amount of electrolyte in the cells. The electrolyte is retained in the separator material and there is no free electrolyte to escape from the cells.
The design of Yuasa UXF batteries incorporates the very latest oxygen recombination technology to maximise the efficiency of operation, eliminating the need for water to be added during its operational life.
Due to the perfectly sealed construction and the recombination of gases with the cell, Yuasa UXF batteries require minimal maintenance while in service.
The combination of the sealed battery construction and Yuasa’s unique electrolyte suspension system allows operation in any orientation, with no loss of performance or leakage of electrolyte (excluding continuous use in inverted position).
Valve Regulated Design
All UXF batteries are equipped with engineered low pressure venting system. This system allows the release of excess gases within the battery which can occur under charging conditions. The system automatically reseals when the internal pressures within the battery return to specified levels.
: UXF batteries should not be charged in a fully sealed container. For further information please contact your local Century Yuasa representative
Lead Calcium Grids
The heavy duty lead calcium alloy grids provide an extra margin of performance and life in both shallow cyclic and float applications, offering unparalleled recovery from deep discharge.
The heavy duty lead calcium tin alloy grids provide excellent resistance against corrosion. The expected service life is 10 years in stationary floating applications.
The specially designed separator material provides a very efficient insulation between the negative and positive plates within the battery. This insulation prevents inter-plate short-circuits and inhibits the shedding of the active material on the plates, thereby maximising the life of the battery.
Long Shelf Life
The extremely low self-discharge rate of the Yuasa UXF batteries allows these batteries to be stored for extended period of up to one year at normal ambient temperatures.
Wide Operating Temperature Range
The industrial design of the Yuasa UXF range provide for use over a broad range of temperatures, providing there is some flexibility in both system design and location.
Charge Temperature Range: -15o
C to 45o
C (Float Use)
Discharge Temperature Range: -20o
C to 60o
Storage Temperature Range: -20o
C to 50o
C (fully charged condition)
All Yuasa lead acid batteries have the potential to be recycled. In most cases, better than 90% of Yuasa lead acid batteries can be recycled. For further information on Century Yuasa’s recycling program, please visit the Recycling section